Equotip Rockwell Portable Hardness Tester
Equotip Rockwell Portable Hardness Tester
Product Description
- แบรนด์ : Proceq (สวิตเซอร์แลนด์)
- เครื่องวัดความแข็ง
- เครื่องวัดความแข็งแบบพกพา
- เครื่องวัดความแข็งโลหะ
Product Features
Specially For Thin Parts
Particularly suited for scratchsensitive and polished parts or on thin parts, profiles and pipes. The required minimum thickness for a reliable hardness reading is ten times the indentation depth. For the mass there is no minimum requirement.
Broad Hardness Scales Coverage
Measurements in HRC and HV with automatic integrated conversions to HB, HRA, HRB and many more common scales in compliance to ASTM E140 and ISO 18265.
Suits Various Sample Geometries
Unique measuring clamp and support feet are available for the probe allowing tests to be carried out on various geometries.
For Any Environment
The Equotip 550 Portable Rockwell can be utilized for on-site, factory and lab environment with almost no limitation.
The Rockwell Measuring Principle
The test principle of the Equotip Portable Rockwell follows the traditional Rockwell static test method. During measurements with the Equotip Portable Rockwell Probe, a diamond indenter is forced into the test piece using a precisely controlled force. The indentation depth of the diamond is continuously measured while a load is applied and released. From the indentation depths d1 and d2 recorded at two defined loads, the difference is calculated: Δ = d2 d1. This is traditionally referred to as plastic deformation.
Product Technical
Equotip 550 Instrument | |
| Display | 7 color display 800x480 pixels |
| Memory | Internal 8 GB Flash memory (up to 1000000 measurements) |
| Regional settings | Metric and Imperial units, multi-language and timezone supported |
| Battery | Lithium Polymer, 3.6 V, 14.0 Ah |
| Battery lifetime | > 8h (in standard operating mode) |
| Power input | 12 V +/-25 % / 1.5 A |
| Weight (of display device) | About 1525 g (incl. Battery) |
| Dimensions | 250 x 162 x 62 mm |
| Max. altitude | 2500 m above sea level |
| Humidity | < 95 % RH, non condensing |
| Operating temperature | - 0 to 30°C (32 to 86°F) (Charging, running instrument) - 0 to 40°C (32 to 104°F) (Charging, instrument is off) - 10 to 50°C (14 to 122°F) (Non-charging) |
| Environment | Suitable for indoor & outdoor use |
| IP classification | IP 54 |
| Pollution degree | 2 |
| Installation category | 2 |
Equotip Portable Rockwell Probe | |
| Measuring range | 0-100 μm; 19-70 HRC; 35-1000 HV |
| Resolution | 0.1 μm; 0.1 HRC; 1 HV |
| Measuring accuracy | +/-0.8 μm; ~ ± 1.0 HRC over entire range |
| Test loads | Preload 10 N / Total Load 50 N |
| Diamond indenter | Angle 100.0° ± 0.5°, diameter of flat area of 60 μm ± 0.5 μm |
| Dimensions | Ø 40 mm, Length 115 mm |
Standardization | |
| Standards | DIN 50157 |
| Guidelines | - DGZfP Guideline MC 1 - VDI / VDE Guideline 2616 Paper 1 - Nordtest Technical Reports 424-1, 424-2, 424-3 |
MakeWebEasy